Tech Veer

After Tata Docomo, Aircel has now launched 1ps/sec plan which they have coined as “Pay Per Second Calling Plan“.

According to the new plan, you will be charged for 1 paisa per second on Local and also STD calls (Upto 500 Min) to any network across India. The full details of the plans are as follows:

ECR with Rs.18 to activate the 1paise/second plan
or
Starter Kit (which includes Lifetime Validity SIM) = Rs 49/- With Rs zero talktime .

Voice Calls

Local Calls – 1 ps/second
STD calls – 1ps/second upto the first 30,000 seconds (i.e.500 Minutes) and after that 2 ps/second in that particular month.

SMS

First 100 SMS Free and then,
Local SMS – 60 paise/SMS
National SMS– Rs 1.20 /SMS
International – Rs 5/SMS

Aircel’s Existing customers can activate this plan by calling the customer care at 121 (Toll Free) from their Aircel Mobile or 9738012345 from any other mobile/landline.

---

[Translate]

        

TrapCall is an interesting solution which allows you to see who is calling you, even if they have blocked their phone number. TrapCall makes use of its technology to unmask the private or blocked numbers. Trapcall is a subsidiary of TelTech System headquartered in New Jersey, USA.
Interestingly, Trapcall doesn’t require any special software or downloads on your mobile phone, it works with any phone on MOST carriers in the US.
In order to get started with TrapCall, follow the steps below
1.) Head over to Trapcall and signup with the service. You can choose from the various plans offered by Trapcall. The free plan covers Unmasking blocked calls.
2.) Once you have chosen the plan,you need to setup your mobile phone. This involves entering details like your Mobile phone number, carrier, timezone and email address.
3.) Once your registration is done, you will be asked to dial a number from your cellphone ( this depends on your carrier etc).
4.) Next you will be given another set of intructions, follow them.
5.) You will be given a forwarding number. Take that and enter in the website.
6.) After you are done, you will be sent a voice mail with a confirmation code. You will be required to enter this confirmation code in the website to complete the setup.
7.) You will be given another number which you must call. This will setup the routing for unmasking blocked numbers.

8.) Next, When you receive a blocked or restricted call, reject it. You don’t want to answer an unknown number anyway right? In a matter of seconds, the blocked call is sent to TrapCall’s servers, where it is instantly unmasked and sent back to your phone! All the while the caller hears a normal ring tone, oblivious to the fact that you know exactly who they are.

---

[Translate]

        

If you are hosting on a Wordpress blog that blocks installation of plug-in, but you want to show your Facebook statuses, pay close attention. This article will teach you a proven method to help achieve the task you desire. This method uses the Wordpress RSS widget as well as the Facebook status feed. If you have your own self-host Wordpress blog, you can still use this, however there are some better plug-in that you may be interested in. Some that might be a lot easier and nicer.

Follow these steps to achieve the desired outcome that you wished to get.

Step 1

First off, you most log into your Facebook, and place your cursor under profile. Once you have clicked profile, look for something called Mini Feed and once you’ve found it, click on See All.
Your browser may not support display of this image.
Step 2

Once you are under Mini Feed, take your mouse and click on “Status Stories”, located on the right column. You will then click on “My Status” which is positioned at the bottom.
Your browser may not support display of this image.
Step 3

The next step is to copy the My Status link. We will then use this in Wordpress blog. The link that you will copy will look something
Your browser may not support display of this image.
Step 4 (Wordpress)

Once you get under the Wordpress Admin, you then need to navigate your page over to Design >> Widget. After reaching this page, look for RSS Widget and proceed to add it onto your side bar.
Your browser may not support display of this image.
Step 5

You now need to paste the URL that you copied inside, and then you must proceed to give it a name and save it. After you have completed this, your Facebook status or statuses will be visible on your Wordpress blog.
Your browser may not support display of this image.
Following these simple steps will allow you to be able to show and view your Facebook statuses on your Wordpress blog. This will come in hand for many things, and is as simple as 1,2,3.

---

[Translate]